BSI PAS 68 V/7,500/48/90:0.3/0.0
Anchors: 2800 x 1400 x 500 / Line Posts: Surface Mounted
When it comes to the Bristorm Beam Fence each fence is infinite in length as long as the maximum distance between anchors is maintained per the manufacturer’s installation manual.
This anti-vehicle fence is comprised of a tensioned two wire rope system in a weave configuration supported by “I” cross-sectioned line posts, terminated at shallow anchor & ground posts and protected with a double-height “W” beam arrangement.
The beam fence consists of the following components:
- Anchor post
- Ground anchor
- Line post
- ‘W’ beam
- Wire rope
- Mechanical fittings
The anti-vehicle fence is tested to BSI PAS 68 and successfully stopped a 7,500kg vehicle at 48kph (30mph) with less than a meter penetration.
To protect the fence from corrosion and give it added longevity the steelwork has been hot-dip galvanised to BS EN ISO1461 as standard.
While the wire rope strands are zinc plated and HDPE coated as per EN 10264-2:2002 or EN 10255-2.
Thicker finishing and powder coatings are available on client request.