Enquire about this product




    See our privacy policy.

    Technical Specifications

    Security Rating

    Engineered to withstand a 7,500 kg vehicle travelling at 48 kph (30mph) and 64 kph (40 mph).

    Minimum Array

    1

    Foundation Depth

    Minimum of 500mm of bollard into foundation. Overall core length - 1,520mm.

    Height Above Ground

    1000mm

    Diameter

    203mm

    Finishes

    Galvanised as standard. Can be powder coated to a specified RAL finish or fitted with an aesthetic sleeve (219mm diameter).

    Table copied

    Information

    The SP400 Fixed Bollard provides a cost-effective solution for perimeter security requirements and meets the security rating for most perimeter security projects.

     

    • The ATG Access SP400 is a fixed high-security bollard which is offered as an engineered solution to complement our SP400 automatic bollard which has been successfully impact-tested to both 48 kph using a 7,500kg vehicle and 64 kph using a 7,500kg vehicle.
    • This product must be installed within an approved, reinforced concrete foundation and at the required 1.2 m spacing.
    • For sites requiring perimeter protection with limited excavation depth available, ATG Access’s range of shallow foundation fixed bollards may be more suitable.
    • The SP400 Fixed Bollard is supplied in a galvanised finish as standard. Alternatively, the bollard can be coated to any RAL colour specified or fitted with a decorative sleeve.

    Select documents to download

    Enquire about this product




      See our privacy policy.