Technical Specifications
| Security Rating |
IWA 14-1: 2013 V/7200[N2A]/80/90:1.4 |
|---|---|
| Minimum Tested Array |
1 |
| Foundation Depth |
1,700 mm |
| Height Above Ground |
1,000 mm |
| Bollard Diameter |
223 mm | 230 mm (Sleeved) |
| Finishes Available |
Supplied galvanised and with technical zinc finishes for excellent corrosion protection. It is then supplied as standard with a Grade 316 Stainless-Steel aesthetic sleeve with two bands. |
| Operation Type |
Operated via a hand-held battery drill; the drill engages with a small hydraulic pump enabling manual deployment within 10-12 seconds. |
| Safety |
Fully compliant with BS EN ISO 13849:2015, safety of machinery - CE Marked. Can also be integrated into a fully compliant TOPAS system. |
Table copied
Information
- IWA-14 Rated, and successfully withstanding impact from a 7,200kg (7.2 tonne) vehicle travelling at 80kph (50mph). This product achieved less than 1.5 meters of penetration on impact in a single bollard configuration.
- Fully compliant with BS EN ISO 13849:2015, safety of machinery – CE Marked. Can also be integrated into a fully compliant TOPAS system.
- Like many other ATG Access retractable bollards, the SP400 Auto 80 Bollard has been designed with reliability and serviceability in mind.
- The bollard can be part of a large, IWA-14 Rated secure access control scheme or operated as a standalone system.
- Operated via a hand-held battery drill; the drill engages with a small hydraulic pump enabling manual deployment within 10-12 seconds.