Technical Specifications
| Security Rating |
IWA 14-1: 2013 V/7200[N2A]/80/90:2.4 (Single Bollard) |
|---|---|
| Security Rating |
BSI PAS 68: 2013 V/7500(N2)/80/90:0.795/10.4 (Dual Bollard) |
| Minimum Array |
1 (single bollard), 2 (dual bollard) |
| Diameter |
230mm |
| Height Above Ground |
1,000 mm |
| Foundation Depth |
1,700 mm |
| Finishes Available |
Technical Zinc Black Finished as standard with two yellow reflective bands. The external HPU model only. Product can be vinyl wrapped with a bespoke design or advertising copy. |
| Operations & Speed |
Up to 90 cycles per hour | Normal operation in approximately 6 - 8 seconds. An optional EFO function is available which facilitates operation within just two seconds. |
| Safety |
Fully compliant with BS EN ISO 13849:2015, safety of machinery - CE Marked. Can also be integrated into a fully compliant TOPAS system. |
Table copied
Information
Designed to be installed as a completely new product or to be retrofitted into existing foundation systems, the Stealth Automatic Bollard is an ideal solution for replacing out of date legacy rising bollard systems which are increasingly difficult to maintain.
- The Stealth was the first British product to be impact tested under IWA 14-1, successfully withstanding a 7,200kg vehicle in both a single and double bollard array. In both tests, the Stealth achieved fantastic results, with the bollards remaining operational even after being hit by such a large vehicle.
- Thanks to its unique design and integral hydraulics the Stealth can be installed as a completely new system or retrofitted to update legacy ones.
- Retrofit high-security products are needed when historic installations become increasingly difficult for the owner to service and keep operational.
- To replace entire systems with new products normally involves the costly and disruptive removal of huge reinforced foundation structures. This issue can be solved by treating existing outer casings with corrosion protection and then retrofitting a solution like the Stealth.
- When it comes to security we understand the importance of longevity, as such the Stealth Automatic Bollard has been designed with reliability and serviceability in mind.
- Driven by hydraulic power, the Stealth automatic bollard system can have either an external HPU or an integral pump.
- It comes zinc coated as standard with two reflective yellow bands.
- We can also supply the product with an aesthetic sleeve (240mm diameter) or with direct LED (RGBW) lights – the external HPU model only.